std::string s;

switch(type) {

case Type::POINTS_COINCIDENT: s = C_("constr-name", "pts-coincident"); break;

case Type::PT_PT_DISTANCE: s = C_("constr-name", "pt-pt-distance"); break;

case Type::PT_LINE_DISTANCE: s = C_("constr-name", "pt-line-distance"); break;

case Type::PT_PLANE_DISTANCE: s = C_("constr-name", "pt-plane-distance"); break;

case Type::PT_FACE_DISTANCE: s = C_("constr-name", "pt-face-distance"); break;

case Type::PROJ_PT_DISTANCE: s = C_("constr-name", "proj-pt-pt-distance"); break;

case Type::PT_IN_PLANE: s = C_("constr-name", "pt-in-plane"); break;

case Type::PT_ON_LINE: s = C_("constr-name", "pt-on-line"); break;

case Type::PT_ON_FACE: s = C_("constr-name", "pt-on-face"); break;

case Type::EQUAL_LENGTH_LINES: s = C_("constr-name", "eq-length"); break;

case Type::EQ_LEN_PT_LINE_D: s = C_("constr-name", "eq-length-and-pt-ln-dist"); break;

case Type::EQ_PT_LN_DISTANCES: s = C_("constr-name", "eq-pt-line-distances"); break;

case Type::LENGTH_RATIO: s = C_("constr-name", "length-ratio"); break;

case Type::ARC_ARC_LEN_RATIO: s = C_("constr-name", "arc-arc-length-ratio"); break;

case Type::ARC_LINE_LEN_RATIO: s = C_("constr-name", "arc-line-length-ratio"); break;

case Type::LENGTH_DIFFERENCE: s = C_("constr-name", "length-difference"); break;

case Type::ARC_ARC_DIFFERENCE: s = C_("constr-name", "arc-arc-len-difference"); break;

case Type::ARC_LINE_DIFFERENCE: s = C_("constr-name", "arc-line-len-difference"); break;

case Type::SYMMETRIC: s = C_("constr-name", "symmetric"); break;

case Type::SYMMETRIC_HORIZ: s = C_("constr-name", "symmetric-h"); break;

case Type::SYMMETRIC_VERT: s = C_("constr-name", "symmetric-v"); break;

case Type::SYMMETRIC_LINE: s = C_("constr-name", "symmetric-line"); break;

case Type::AT_MIDPOINT: s = C_("constr-name", "at-midpoint"); break;

case Type::HORIZONTAL: s = C_("constr-name", "horizontal"); break;

case Type::VERTICAL: s = C_("constr-name", "vertical"); break;

case Type::DIAMETER: s = C_("constr-name", "diameter"); break;

case Type::PT_ON_CIRCLE: s = C_("constr-name", "pt-on-circle"); break;

case Type::SAME_ORIENTATION: s = C_("constr-name", "same-orientation"); break;

case Type::ANGLE: s = C_("constr-name", "angle"); break;

case Type::PARALLEL: s = C_("constr-name", "parallel"); break;

case Type::ARC_LINE_TANGENT: s = C_("constr-name", "arc-line-tangent"); break;

case Type::CUBIC_LINE_TANGENT: s = C_("constr-name", "cubic-line-tangent"); break;

case Type::CURVE_CURVE_TANGENT: s = C_("constr-name", "curve-curve-tangent"); break;

case Type::PERPENDICULAR: s = C_("constr-name", "perpendicular"); break;

case Type::EQUAL_RADIUS: s = C_("constr-name", "eq-radius"); break;

case Type::EQUAL_ANGLE: s = C_("constr-name", "eq-angle"); break;

case Type::EQUAL_LINE_ARC_LEN: s = C_("constr-name", "eq-line-len-arc-len"); break;

case Type::WHERE_DRAGGED: s = C_("constr-name", "lock-where-dragged"); break;

case Type::COMMENT: s = C_("constr-name", "comment"); break;

default: s = "???"; break;

}

return ssprintf("c%03x-%s", h.v, s.c_str());

{

SK.constraint.ClearTags();

for(auto &constraint : SK.constraint) {

ConstraintBase *ct = &constraint;

if(ct->type != type) continue;

if(ct->entityA != entityA) continue;

if(ct->ptA != ptA) continue;

ct->tag = 1;

}

SK.constraint.RemoveTagged();

// And no need to do anything special, since nothing

// ever depends on a constraint. But do clear the

// hover, in case the just-deleted constraint was

// hovered.

SS.GW.hover.Clear();

if(rememberForUndo) SS.UndoRemember();

hConstraint hc = SK.constraint.AddAndAssignId(c);

SK.GetConstraint(hc)->Generate(&SK.param);

SS.MarkGroupDirty(c->group);

SK.GetGroup(c->group)->dofCheckOk = false;

return c->h;

hEntity entityA, hEntity entityB,

bool other, bool other2)

{

Constraint c = {};

c.group = SS.GW.activeGroup;

c.workplane = SS.GW.ActiveWorkplane();

c.type = type;

c.ptA = ptA;

c.ptB = ptB;

c.entityA = entityA;

c.entityB = entityB;

c.other = other;

c.other2 = other2;

return AddConstraint(&c, /*rememberForUndo=*/false);

hEntity entityA, hEntity entityB,

bool other, bool other2) {

int rankBefore, rankAfter;

SolveResult howBefore = SS.TestRankForGroup(SS.GW.activeGroup, &rankBefore);

hConstraint hc = Constrain(type, ptA, ptB, entityA, entityB, other, other2);

SolveResult howAfter = SS.TestRankForGroup(SS.GW.activeGroup, &rankAfter);

// There are two cases where the constraint is clearly redundant:

// * If the group wasn't overconstrained and now it is;

// * If the group was overconstrained, and adding the constraint doesn't change rank at all.

if((howBefore == SolveResult::OKAY && howAfter == SolveResult::REDUNDANT_OKAY) ||

(howBefore == SolveResult::REDUNDANT_OKAY && howAfter == SolveResult::REDUNDANT_OKAY &&

rankBefore == rankAfter)) {

SK.constraint.RemoveById(hc);

hc = {};

}

return hc;

Entity *arcendpoint) {

Vector l0 = SK.GetEntity(line->point[0])->PointGetNum(),

l1 = SK.GetEntity(line->point[1])->PointGetNum();

Vector a1 = SK.GetEntity(arc->point[1])->PointGetNum(),

a2 = SK.GetEntity(arc->point[2])->PointGetNum();

if(l0.Equals(a1) || l1.Equals(a1)) {

c->other = false;

} else if(l0.Equals(a2) || l1.Equals(a2)) {

c->other = true;

} else if(nullptr != arcendpoint) {

Vector p = arcendpoint->PointGetNum();

if(a1.Equals(p)) {

c->other = false;

} else if(a2.Equals(p)) {

c->other = true;

} else {

Error(_("The point you selected does not belong to the arc. "

"The arc and line segment do not share an end point.\n\n"

"Select the end point of the arc at which you want "

"it to be tangent to the line."));

return false;

}

} else {

Error(_("The tangent arc and line segment must share an "

"endpoint. Constrain them with Constrain -> "

"On Point before constraining tangent.\n\n"

"Alternatively select the end point of the arc "

"at which you want it to be tangent to the line."));

return false;

}

return true;

Entity *curveendpoint) {

Vector l0 = SK.GetEntity(line->point[0])->PointGetNum(),

l1 = SK.GetEntity(line->point[1])->PointGetNum();

Vector as = cubic->CubicGetStartNum(),

af = cubic->CubicGetFinishNum();

if(l0.Equals(as) || l1.Equals(as)) {

c->other = false;

} else if(l0.Equals(af) || l1.Equals(af)) {

c->other = true;

} else if(nullptr != curveendpoint) {

Vector p = curveendpoint->PointGetNum();

if(as.Equals(p)) {

c->other = false;

} else if(af.Equals(p)) {

c->other = true;

} else {

Error(_("The point you selected is not an end point of the cubic spline. "

"The spline and line segment do not share an end point.\n\n"

"Select the end point of the spline at which you want "

"it to be tangent to the line."));

return false;

}

} else {

Error(_("The tangent cubic spline and line segment must share an "

"endpoint. Constrain them with Constrain -> "

"On Point before constraining tangent.\n\n"

"Alternatively select the end point of the cubic spline "

"at which you want it to be tangent to the line."));

return false;

}

return true;

Entity *epB) {

Vector as = eA->EndpointStart(),

af = eA->EndpointFinish(),

bs = eB->EndpointStart(),

bf = eB->EndpointFinish();

if(as.Equals(bs)) {

c->other = false;

c->other2 = false;

} else if(as.Equals(bf)) {

c->other = false;

c->other2 = true;

} else if(af.Equals(bs)) {

c->other = true;

c->other2 = false;

} else if(af.Equals(bf)) {

c->other = true;

c->other2 = true;

} else if((nullptr != epA) && (nullptr != epB)) {

Vector pa = epA->PointGetNum(),

pb = epB->PointGetNum();

if((as.Equals(pa) && bs.Equals(pb)) || (as.Equals(pb) && bs.Equals(pa))) {

c->other = false;

c->other2 = false;

} else if((as.Equals(pa) && bf.Equals(pb)) || (as.Equals(pb) && bf.Equals(pa))) {

c->other = false;

c->other2 = true;

} else if((af.Equals(pa) && bs.Equals(pb)) || (af.Equals(pb) && bs.Equals(pa))) {

c->other = true;

c->other2 = false;

} else if((af.Equals(pa) && bf.Equals(pb)) || (af.Equals(pb) && bf.Equals(pa))) {

c->other = true;

c->other2 = true;

} else {

Error(_("The points you selected are not end points of the two curves. "

"The curves do not share an end point.\n\n"

"Select the end points of both curves at which you want "

"them to be tangent to each other."));

return false;

}

} else {

Error(_("The curves must share an endpoint. Constrain them "

"with Constrain -> On Point before constraining "

"tangent.\n\n"

"Alternatively select the end points of both "

"curves at which you want the curves to be tangent."));

return false;

}

return true;

std::vector<Constraint> newcons;

Constraint c = {};

c.group = SS.GW.activeGroup;

c.workplane = SS.GW.ActiveWorkplane();

SS.GW.GroupSelection();

auto const &gs = SS.GW.gs;

switch(id) {

case Command::DISTANCE_DIA:

case Command::REF_DISTANCE: {

if(gs.points == 2 && gs.n == 2) {

c.type = Type::PT_PT_DISTANCE;

c.ptA = gs.point[0];

c.ptB = gs.point[1];

} else if(gs.lineSegments == 1 && gs.n == 1) {

c.type = Type::PT_PT_DISTANCE;

Entity *e = SK.GetEntity(gs.entity[0]);

c.ptA = e->point[0];

c.ptB = e->point[1];

} else if(gs.vectors == 1 && gs.points == 2 && gs.n == 3) {

c.type = Type::PROJ_PT_DISTANCE;

c.ptA = gs.point[0];

c.ptB = gs.point[1];

c.entityA = gs.vector[0];

} else if(gs.workplanes == 1 && gs.points == 1 && gs.n == 2) {

c.type = Type::PT_PLANE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.lineSegments == 1 && gs.points == 1 && gs.n == 2) {

c.type = Type::PT_LINE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.faces == 1 && gs.points == 1 && gs.n == 2) {

c.type = Type::PT_FACE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.face[0];

} else if(gs.circlesOrArcs == 1 && gs.n == 1) {

c.type = Type::DIAMETER;

c.entityA = gs.entity[0];

Entity* arc = SK.GetEntity(gs.entity[0]);

if ((arc->type == EntityBase::Type::ARC_OF_CIRCLE)

&& (!SS.arcDimDefaultDiameter))

{

c.other = true;

}

} else {

Error(_("Bad selection for distance / diameter constraint. This "

"constraint can apply to:\n\n"

" * two points (distance between points)\n"

" * a line segment (length)\n"

" * two points and a line segment or normal (projected distance)\n"

" * a workplane and a point (minimum distance)\n"

" * a line segment and a point (minimum distance)\n"

" * a plane face and a point (minimum distance)\n"

" * a circle or an arc (diameter)\n"));

return;

}

if(c.type == Type::PT_PT_DISTANCE || c.type == Type::PROJ_PT_DISTANCE) {

Vector n = SS.GW.projRight.Cross(SS.GW.projUp);

Vector a = SK.GetEntity(c.ptA)->PointGetNum();

Vector b = SK.GetEntity(c.ptB)->PointGetNum();

c.disp.offset = n.Cross(a.Minus(b));

c.disp.offset = (c.disp.offset).WithMagnitude(50/SS.GW.scale);

} else {

c.disp.offset = Vector::From(0, 0, 0);

}

if(id == Command::REF_DISTANCE) {

c.reference = true;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

newcons.push_back(c);

break;

}

case Command::ON_ENTITY:

if(gs.points >= 2 && gs.points == gs.n) {

c.type = Type::POINTS_COINCIDENT;

c.ptA = gs.point[0];

for(int k = 1; k < gs.points; k++) {

c.ptB = gs.point[k];

newcons.push_back(c);

}

} else if(gs.points == 1 && gs.workplanes == 1 && gs.n == 2) {

c.type = Type::PT_IN_PLANE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

newcons.push_back(c);

} else if(gs.points == 1 && gs.lineSegments == 1 && gs.n == 2) {

c.type = Type::PT_ON_LINE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

newcons.push_back(c);

} else if(gs.points == 1 && gs.circlesOrArcs == 1 && gs.n == 2) {

c.type = Type::PT_ON_CIRCLE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

newcons.push_back(c);

} else if(gs.points == 1 && gs.faces >= 1 && gs.n == gs.points+gs.faces) {

c.type = Type::PT_ON_FACE;

c.ptA = gs.point[0];

for (int k=0; k<gs.faces; k++) {

c.entityA = gs.face[k];

newcons.push_back(c);

}

} else {

Error(_("Bad selection for on point / curve / plane constraint. "

"This constraint can apply to:\n\n"

" * two or more points (points coincident)\n"

" * a point and a workplane (point in plane)\n"

" * a point and a line segment (point on line)\n"

" * a point and a circle or arc (point on curve)\n"

" * a point and one to three plane faces (point on face(s))\n"));

return;

}

for (auto&& nc : newcons)

AddConstraint(&nc);

break;

case Command::EQUAL:

if(gs.lineSegments >= 2 && gs.lineSegments == gs.n) {

c.type = Type::EQUAL_LENGTH_LINES;

c.entityA = gs.entity[0];

for (std::vector<hEntity>::size_type k = 1;k < gs.entity.size(); ++k){

c.entityB = gs.entity[k];

newcons.push_back(c);

}

} else if(gs.lineSegments == 2 && gs.points == 2 && gs.n == 4) {

c.type = Type::EQ_PT_LN_DISTANCES;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.entityB = gs.entity[1];

c.ptB = gs.point[1];

newcons.push_back(c);

} else if(gs.lineSegments == 1 && gs.points == 2 && gs.n == 3) {

// The same line segment for the distances, but different

// points.

c.type = Type::EQ_PT_LN_DISTANCES;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.entityB = gs.entity[0];

c.ptB = gs.point[1];

newcons.push_back(c);

} else if(gs.lineSegments == 2 && gs.points == 1 && gs.n == 3) {

c.type = Type::EQ_LEN_PT_LINE_D;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

c.ptA = gs.point[0];

newcons.push_back(c);

} else if(gs.circlesOrArcs >= 2 && gs.circlesOrArcs == gs.n) {

c.type = Type::EQUAL_RADIUS;

c.entityA = gs.entity[0];

for (std::vector<hEntity>::size_type k = 1;k < gs.entity.size(); ++k){

c.entityB = gs.entity[k];

newcons.push_back(c);

}

} else if(gs.arcs == 1 && gs.lineSegments == 1 && gs.n == 2) {

c.type = Type::EQUAL_LINE_ARC_LEN;

if(SK.GetEntity(gs.entity[0])->type == Entity::Type::ARC_OF_CIRCLE) {

c.entityA = gs.entity[1];

c.entityB = gs.entity[0];

} else {

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

newcons.push_back(c);

} else {

Error(_("Bad selection for equal length / radius constraint. "

"This constraint can apply to:\n\n"

" * two or more line segments (equal length)\n"

" * two line segments and two points "

"(equal point-line distances)\n"

" * a line segment and two points "

"(equal point-line distances)\n"

" * a line segment, and a point and line segment "

"(point-line distance equals length)\n"

" * two or more circles or arcs (equal radius)\n"

" * a line segment and an arc "

"(line segment length equals arc length)\n"));

return;

}

SS.UndoRemember();

for (auto&& nc : newcons){

if(nc.type == Type::EQUAL_ANGLE) {

// Infer the nearest supplementary angle from the sketch.

Vector a1 = SK.GetEntity(c.entityA)->VectorGetNum(),

b1 = SK.GetEntity(c.entityB)->VectorGetNum(),

a2 = SK.GetEntity(c.entityC)->VectorGetNum(),

b2 = SK.GetEntity(c.entityD)->VectorGetNum();

double d1 = a1.Dot(b1), d2 = a2.Dot(b2);

if(d1*d2 < 0) {

nc.other = true;

}

}

AddConstraint(&nc, /*rememberForUndo=*/false);

}

break;

case Command::RATIO:

if(gs.lineSegments == 2 && gs.n == 2) {

c.type = Type::LENGTH_RATIO;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

else if(gs.arcs == 2 && gs.n == 2) {

c.type = Type::ARC_ARC_LEN_RATIO;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

else if(gs.lineSegments == 1 && gs.arcs == 1 && gs.n == 2) {

c.type = Type::ARC_LINE_LEN_RATIO;

if(SK.GetEntity(gs.entity[0])->type == Entity::Type::ARC_OF_CIRCLE) {

c.entityA = gs.entity[1];

c.entityB = gs.entity[0];

} else {

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

} else {

Error(_("Bad selection for length ratio constraint. This "

"constraint can apply to:\n\n"

" * two line segments\n"

" * two arcs\n"

" * one arc and one line segment\n"));

return;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

newcons.push_back(c);

break;

case Command::DIFFERENCE:

if(gs.lineSegments == 2 && gs.n == 2) {

c.type = Type::LENGTH_DIFFERENCE;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

else if(gs.arcs == 2 && gs.n == 2) {

c.type = Type::ARC_ARC_DIFFERENCE;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

else if(gs.lineSegments == 1 && gs.arcs == 1 && gs.n == 2) {

c.type = Type::ARC_LINE_DIFFERENCE;

if(SK.GetEntity(gs.entity[0])->type == Entity::Type::ARC_OF_CIRCLE) {

c.entityA = gs.entity[1];

c.entityB = gs.entity[0];

} else {

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

} else {

Error(_("Bad selection for length difference constraint. This "

"constraint can apply to:\n\n"

" * two line segments\n"

" * two arcs\n"

" * one arc and one line segment\n"));

return;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

newcons.push_back(c);

break;

case Command::AT_MIDPOINT:

if(gs.lineSegments == 1 && gs.points == 1 && gs.n == 2) {

c.type = Type::AT_MIDPOINT;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

// If a point is at-midpoint, then no reason to also constrain

// it on-line; so auto-remove that. Handle as one undo group.

SS.UndoRemember();

DeleteAllConstraintsFor(Type::PT_ON_LINE, c.entityA, c.ptA);

AddConstraint(&c, /*rememberForUndo=*/false);

newcons.push_back(c);

break;

} else if(gs.lineSegments == 1 && gs.workplanes == 1 && gs.n == 2) {

c.type = Type::AT_MIDPOINT;

int i = SK.GetEntity(gs.entity[0])->IsWorkplane() ? 1 : 0;

c.entityA = gs.entity[i];

c.entityB = gs.entity[1-i];

AddConstraint(&c);

newcons.push_back(c);

} else {

Error(_("Bad selection for at midpoint constraint. This "

"constraint can apply to:\n\n"

" * a line segment and a point "

"(point at midpoint)\n"

" * a line segment and a workplane "

"(line's midpoint on plane)\n"));

return;

}

break;

case Command::SYMMETRIC:

if(gs.points == 2 &&

((gs.workplanes == 1 && gs.n == 3) ||

(gs.n == 2)))

{

if(gs.entities > 0)

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.ptB = gs.point[1];

c.type = Type::SYMMETRIC;

} else if(gs.lineSegments == 1 &&

((gs.workplanes == 1 && gs.n == 2) ||

(gs.n == 1)))

{

Entity *line;

if(SK.GetEntity(gs.entity[0])->IsWorkplane()) {

line = SK.GetEntity(gs.entity[1]);

c.entityA = gs.entity[0];

} else {

line = SK.GetEntity(gs.entity[0]);

}

c.ptA = line->point[0];

c.ptB = line->point[1];

c.type = Type::SYMMETRIC;

} else if(SS.GW.LockedInWorkplane()

&& gs.lineSegments == 2 && gs.n == 2)

{

Entity *l0 = SK.GetEntity(gs.entity[0]),

*l1 = SK.GetEntity(gs.entity[1]);

if((l1->group != SS.GW.activeGroup) ||

(l1->construction && !(l0->construction)))

{

swap(l0, l1);

}

c.ptA = l1->point[0];

c.ptB = l1->point[1];

c.entityA = l0->h;

c.type = Type::SYMMETRIC_LINE;

} else if(SS.GW.LockedInWorkplane()

&& gs.lineSegments == 1 && gs.points == 2 && gs.n == 3)

{

c.ptA = gs.point[0];

c.ptB = gs.point[1];

c.entityA = gs.entity[0];

c.type = Type::SYMMETRIC_LINE;

} else {

Error(_("Bad selection for symmetric constraint. This constraint "

"can apply to:\n\n"

" * two points or a line segment "

"(symmetric about workplane's coordinate axis)\n"

" * line segment, and two points or a line segment "

"(symmetric about line segment)\n"

" * workplane, and two points or a line segment "

"(symmetric about workplane)\n"));

return;

}

// We may remove constraints so remember manually

if(c.entityA == Entity::NO_ENTITY) {

// Horizontal / vertical symmetry, implicit symmetry plane

// normal to the workplane

if(c.workplane == Entity::FREE_IN_3D) {

Error(_("A workplane must be active when constraining "

"symmetric without an explicit symmetry plane."));

return;

}

Vector pa = SK.GetEntity(c.ptA)->PointGetNum();

Vector pb = SK.GetEntity(c.ptB)->PointGetNum();

Vector dp = pa.Minus(pb);

EntityBase *norm = SK.GetEntity(c.workplane)->Normal();;

Vector u = norm->NormalU(), v = norm->NormalV();

if(fabs(dp.Dot(u)) > fabs(dp.Dot(v))) {

c.type = Type::SYMMETRIC_HORIZ;

} else {

c.type = Type::SYMMETRIC_VERT;

}

if(gs.lineSegments == 1) {

// If this line segment is already constrained horiz or

// vert, then auto-remove that redundant constraint.

// Handle as one undo group.

SS.UndoRemember();

DeleteAllConstraintsFor(Type::HORIZONTAL, (gs.entity[0]),

Entity::NO_ENTITY);

DeleteAllConstraintsFor(Type::VERTICAL, (gs.entity[0]),

Entity::NO_ENTITY);

AddConstraint(&c, /*rememberForUndo=*/false);

newcons.push_back(c);

break;

}

}

AddConstraint(&c);

newcons.push_back(c);

break;

case Command::VERTICAL:

case Command::HORIZONTAL: {

if(id == Command::HORIZONTAL) {

c.type = Type::HORIZONTAL;

} else {

c.type = Type::VERTICAL;

}

if(c.workplane == Entity::FREE_IN_3D) {

Error(_("Activate a workplane (with Sketch -> In Workplane) before "

"applying a horizontal or vertical constraint."));

return;

}

if(gs.lineSegments > 0 && gs.lineSegments == gs.n) {

for (auto enti : gs.entity){

c.entityA = enti;

newcons.push_back(c);

}

} else if(gs.points >= 2 && gs.n == gs.points) {

c.ptA = gs.point[0];

for (int k = 1; k<gs.points; k++) {

c.ptB = gs.point[k];

newcons.push_back(c);

}

} else {

Error(_("Bad selection for horizontal / vertical constraint. "

"This constraint can apply to:\n\n"

" * two or more points\n"

" * one or more line segments\n"));

return;

}

SS.UndoRemember();

for (auto && nc: newcons)

AddConstraint(&nc, /*rememberForUndo=*/false);

break;

}

case Command::ORIENTED_SAME: {

if(gs.anyNormals == 2 && gs.n == 2) {

c.type = Type::SAME_ORIENTATION;

c.entityA = gs.anyNormal[0];

c.entityB = gs.anyNormal[1];

} else {

Error(_("Bad selection for same orientation constraint. This "

"constraint can apply to:\n\n"

" * two normals\n"));

return;

}

SS.UndoRemember();

Entity *nfree = SK.GetEntity(c.entityA);

Entity *nref = SK.GetEntity(c.entityB);

if(nref->group == SS.GW.activeGroup) {

swap(nref, nfree);

}

if(nfree->group == SS.GW.activeGroup && nref->group != SS.GW.activeGroup) {

// nfree is free, and nref is locked (since it came from a

// previous group); so let's force nfree aligned to nref,

// and make convergence easy

Vector ru = nref ->NormalU(), rv = nref ->NormalV();

Vector fu = nfree->NormalU(), fv = nfree->NormalV();

if(fabs(fu.Dot(ru)) < fabs(fu.Dot(rv))) {

// There might be an odd*90 degree rotation about the

// normal vector; allow that, since the numerical

// constraint does

swap(ru, rv);

}

fu = fu.Dot(ru) > 0 ? ru : ru.ScaledBy(-1);

fv = fv.Dot(rv) > 0 ? rv : rv.ScaledBy(-1);

nfree->NormalForceTo(Quaternion::From(fu, fv));

}

AddConstraint(&c, /*rememberForUndo=*/false);

newcons.push_back(c);

break;

}

case Command::OTHER_ANGLE:

if(gs.constraints == 1 && gs.n == 0) {

Constraint *c = SK.GetConstraint(gs.constraint[0]);

if(c->type == Type::ANGLE) {

SS.UndoRemember();

c->other = !(c->other);

c->ModifyToSatisfy();

break;

}

if(c->type == Type::EQUAL_ANGLE) {

SS.UndoRemember();

c->other = !(c->other);

SS.MarkGroupDirty(c->group);

break;

}

}

Error(_("Must select an angle constraint."));

return;

case Command::REFERENCE:

if(gs.constraints == 1 && gs.n == 0) {

Constraint *c = SK.GetConstraint(gs.constraint[0]);

if(c->HasLabel() && c->type != Type::COMMENT) {

SS.UndoRemember();

(c->reference) = !(c->reference);

SS.MarkGroupDirty(c->group, /*onlyThis=*/true);

break;

}

}

Error(_("Must select a constraint with associated label."));

return;

case Command::ANGLE:

case Command::REF_ANGLE: {

if(gs.vectors == 3 && gs.n == 3) {

c.type = Type::EQUAL_ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.entityC = gs.vector[1];

c.entityD = gs.vector[2];

} else if(gs.vectors == 4 && gs.n == 4) {

c.type = Type::EQUAL_ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.entityC = gs.vector[2];

c.entityD = gs.vector[3];

} else if(gs.vectors == 2 && gs.n == 2) {

c.type = Type::ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.valA = 0;

} else {

Error(_("Bad selection for angle constraint. This constraint "

"can apply to:\n\n"

"Angle between:\n"

" * two line segments\n"

" * a line segment and a normal\n"

" * two normals\n"

"\nEqual angles:\n"

" * four line segments or normals "

"(equal angle between A,B and C,D)\n"

" * three line segments or normals "

"(equal angle between A,B and B,C)\n"));

return;

}

Entity *ea = SK.GetEntity(c.entityA),

*eb = SK.GetEntity(c.entityB);

if(ea->type == Entity::Type::LINE_SEGMENT &&

eb->type == Entity::Type::LINE_SEGMENT)

{

Vector a0 = SK.GetEntity(ea->point[0])->PointGetNum(),

a1 = SK.GetEntity(ea->point[1])->PointGetNum(),

b0 = SK.GetEntity(eb->point[0])->PointGetNum(),

b1 = SK.GetEntity(eb->point[1])->PointGetNum();

if(a0.Equals(b0) || a1.Equals(b1)) {

// okay, vectors should be drawn in same sense

} else if(a0.Equals(b1) || a1.Equals(b0)) {

// vectors are in opposite sense

c.other = true;

} else {

// no shared point; not clear which intersection to draw

}

}

if(id == Command::REF_ANGLE) {

c.reference = true;

}

c.ModifyToSatisfy();

AddConstraint(&c);

newcons.push_back(c);

break;

}

case Command::PARALLEL:

if(gs.faces == 2 && gs.n == 2) {

c.type = Type::PARALLEL;

c.entityA = gs.face[0];

c.entityB = gs.face[1];

newcons.push_back(c);

} else if(gs.vectors > 1 && gs.vectors == gs.n) {

c.type = Type::PARALLEL;

c.entityA = gs.vector[0];

for (std::vector<hEntity>::size_type k = 1; k < gs.vector.size();++k ){

c.entityB = gs.vector[k];

newcons.push_back(c);

}

} else if(gs.lineSegments == 1 && gs.arcs == 1 &&

(gs.n == 2 || (gs.points == 1 && gs.n == 3))) {

Entity *line = SK.GetEntity(gs.entity[0]),

*arc = SK.GetEntity(gs.entity[1]);

if(line->type == Entity::Type::ARC_OF_CIRCLE) {

swap(line, arc);

}

if(!ConstrainArcLineTangent(

&c, line, arc, (1 == gs.points) ? SK.GetEntity(gs.point[0]) : nullptr)) {

return;

}

c.type = Type::ARC_LINE_TANGENT;

c.entityA = arc->h;

c.entityB = line->h;

newcons.push_back(c);

} else if(gs.lineSegments == 1 && gs.cubics == 1 &&

(gs.n == 2 || (gs.points == 1 && gs.n == 3))) {

Entity *line = SK.GetEntity(gs.entity[0]),

*cubic = SK.GetEntity(gs.entity[1]);

if(line->type == Entity::Type::CUBIC) {

swap(line, cubic);

}

if(!ConstrainCubicLineTangent(

&c, line, cubic, (1 == gs.points) ? SK.GetEntity(gs.point[0]) : nullptr)) {

return;

}

c.type = Type::CUBIC_LINE_TANGENT;

c.entityA = cubic->h;

c.entityB = line->h;

newcons.push_back(c);

} else if(gs.cubics + gs.arcs == 2 && (gs.n == 2 || (gs.points == 2 && gs.n == 4))) {

if(!SS.GW.LockedInWorkplane()) {

Error(_("Curve-curve tangency must apply in workplane."));

return;

}

Entity *eA = SK.GetEntity(gs.entity[0]),

*eB = SK.GetEntity(gs.entity[1]);

if(!ConstrainCurveCurveTangent(

&c, eA, eB, (2 == gs.points) ? SK.GetEntity(gs.point[0]) : nullptr,

(2 == gs.points) ? SK.GetEntity(gs.point[1]) : nullptr)) {

return;

}

c.type = Type::CURVE_CURVE_TANGENT;

c.entityA = eA->h;

c.entityB = eB->h;

newcons.push_back(c);

} else {

Error(_("Bad selection for parallel / tangent constraint. This "

"constraint can apply to:\n\n"

" * two faces\n"

" * two or more line segments (parallel)\n"

" * one or more line segments and one or more normals (parallel)\n"

" * two or more normals (parallel)\n"

" * two line segments, arcs, or beziers, that share "

"an endpoint (tangent)\n"

" * two line segments, arcs, or beziers, that do not share "

"an endpoint and the end point(s) of the curve(s) (tangent)\n"));

return;

}

SS.UndoRemember();

for (auto&& nc:newcons)

AddConstraint(&nc, /*rememberForUndo=*/false);

break;

case Command::PERPENDICULAR:

if(gs.faces == 2 && gs.n == 2) {

c.type = Type::PERPENDICULAR;

c.entityA = gs.face[0];

c.entityB = gs.face[1];

} else if(gs.vectors == 2 && gs.n == 2) {

c.type = Type::PERPENDICULAR;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

} else {

Error(_("Bad selection for perpendicular constraint. This "

"constraint can apply to:\n\n"

" * two faces\n"

" * two line segments\n"

" * a line segment and a normal\n"

" * two normals\n"));

return;

}

AddConstraint(&c);

newcons.push_back(c);

break;

case Command::WHERE_DRAGGED:

if(gs.points == 1 && gs.n == 1) {

c.type = Type::WHERE_DRAGGED;

c.ptA = gs.point[0];

} else {

Error(_("Bad selection for lock point where dragged constraint. "

"This constraint can apply to:\n\n"

" * a point\n"));

return;

}

AddConstraint(&c);

newcons.push_back(c);

break;

case Command::COMMENT:

if(gs.points == 1 && gs.n == 1) {

c.type = Type::COMMENT;

c.ptA = gs.point[0];

c.group = SS.GW.activeGroup;

c.workplane = SS.GW.ActiveWorkplane();

c.comment = _("NEW COMMENT -- DOUBLE-CLICK TO EDIT");

AddConstraint(&c);

newcons.push_back(c);

} else {

SS.GW.pending.operation = GraphicsWindow::Pending::COMMAND;

SS.GW.pending.command = Command::COMMENT;

SS.GW.pending.description = _("click center of comment text");

SS.ScheduleShowTW();

}

break;

default: ssassert(false, "Unexpected menu ID");

}

for (auto nc:newcons){

for(const Constraint &cc : SK.constraint) {

if(nc.h != cc.h && nc.Equals(cc)) {

// Oops, we already have this exact constraint. Remove the one we just added.

SK.constraint.RemoveById(nc.h);

SS.GW.ClearSelection();

// And now select the old one, to give feedback.

SS.GW.MakeSelected(cc.h);

return;

}

}

if(SK.constraint.FindByIdNoOops(nc.h)) {

Constraint *constraint = SK.GetConstraint(nc.h);

if(SS.TestRankForGroup(nc.group) == SolveResult::REDUNDANT_OKAY &&

!SK.GetGroup(SS.GW.activeGroup)->allowRedundant &&

constraint->HasLabel()) {

constraint->reference = true;

}

}

if((id == Command::DISTANCE_DIA || id == Command::ANGLE ||

id == Command::RATIO || id == Command::DIFFERENCE) &&

SS.immediatelyEditDimension) {

SS.GW.EditConstraint(nc.h);

}

}

SS.GW.ClearSelection();